LIEBHERR Crane Fault Codes DTC
Liebherr-Excavator-Fault-Codes-DTC
LIEBHERR Fault Codes DTC
000001 ZE 0: OS-HC11 system error (see parameter) initialization error, processor register is not working properly
Crane operation is not possible.
If the error appears again, then ZE should be replaced.
000002 ZE 0: OS-HC11 system error (see parameter) initialization error, EPROM / flash checksum is wrong
Crane operation is not possible.
Check program card or ZE.
000006 ZE 0: OS-HC11 system error (see parameter) initialization error, malfunction in RAM
Crane operation is not possible.
If the error appears again, then ZE should be replaced.
000007 ZE 0: OS-HC11 system error (see parameter) UART mistakenly
Crane operation is not possible.
If the error appears again, then ZE should be replaced.
000010 ZE 0: OS-HC11 system error (see parameter) system program locked
Fixation in the memory of registration of errors. all crane movements stop.
000011 ZE 0: OS-HC11 system error (see parameter) ZE self-monitoring stopped
Fixation in the memory of registration of errors. all crane movements stop.
Check ZE.
000012 ZE 0: OS-HC11 system error (see parameter) type code in EPROM is incorrect
Fixation in the memory of registration of errors. Crane operation is not possible.
Check program card.
000013 ZE 0: OS-HC11 system error (see parameter) EPROM / Flash checksum is incorrect
Fixation in the memory of registration of errors. all crane movements stop.
Check program card.
000014 ZE 0: OS-HC11 system error (see parameter) program is already running
Fixation in the memory of registration of errors. all crane movements stop.
000015 ZE 0: OS-HC11 system error (see parameter) program is missing
Fixation in the memory of registration of errors. all crane movements stop.
000016 ZE 0: OS-HC11 system error (see parameter) system self-monitoring, driver stopped
Fixation in the memory of registration of errors. all crane movements stop.
000017 ZE 0: OS-HC11 system error (see parameter) amount of CPU time allocation is too large
Fixation in the memory of registration of errors. all crane movements stop.
000018 ZE 0: OS-HC11 system error (see parameter) arithmetic overflow (16 bits)
Fixation in the memory of registration of errors. all crane movements stop.
000019 ZE 0: OS-HC11 system error (see parameter) division by zero (16 bits)
Fixation in the memory of registration of errors. all crane movements stop.
000020 ZE 0: OS-HC11 system error (see parameter) self-monitoring task stopped working
Fixation in the memory of registration of errors. all crane movements stop.
000021 ZE 0: OS-HC11 system error (see parameter) system interruption by prohibited operation code
Fixation in the memory of registration of errors. all crane movements stop.
If the error appears again, then ZE should be replaced.
000022 ZE 0: OS-HC11 system error (see parameter). Task is inactive.
Fixation in the memory of registration of errors. all crane movements stop.
000023 ZE 0: OS-HC11 system error (see parameter) program is not operational (type code)
Fixation in the memory of registration of errors. all crane movements stop.
000024 ZE 0: OS-HC11 system error (see parameter) task already in use
Fixation in the memory of registration of errors. all crane movements stop.
000025 ZE 0: OS-HC11 system error (see parameter) real-time module already in use
Fixation in the memory of registration of errors. all crane movements stop.